Electric Shock Resistance Hand Gloves

	Download Technical Sheet
The absolutely safe KCL protective Insulating gloves are made from natural latex and available in 500V / 1000V / 7500V / 17000V and 26 000V. The anatomical design, very good flexibility and differing wall thickness of the gloves, as well as the anti-bacterial finish, giving additional skin protection and all of the above is particularly important when wearing gloves for extended periods.
Summary Table
Class Category Thickness en mm (1) Proof test voltage (2) Maxi. use voltage (2) Length available Reference 00 AZC 0.5 2 500 500 27 cm/ 36 cm GLE27 00 /GLE36 00 0 AZC 1.0 5 000 1 000 36 cm/ 41 cm GLE36 0 /GLE41 1 1 AZC 1.5 10 000 7 500 36 cm/ 41 cm GLE36 1 /GLE41 1 2 RC 2.3 20 000 17 000 36 cm/ 41 cm GLE36 2 /GLE41 2 3 RC 2.9 30 000 26 500 36 cm/ 41 cm GLE36 3 /GLE41 3 4 RC 3.6 40 000 36 000 41 cm GLE41 4
Categories allow an over thickness of 0.6 mm Electrical tests are done in alternating current Sizes Available 8 –9 –10 –11
Mechanical Requirements
Tensile strength - 16 Mpa Puncture resistance - 18 N/mm Elongation at break - 600 % Tension set - 15%
Thermal Tests
RESISTANCE TO LOW TEMPERATURE : Conditioning of gloves for 1 hour at -25 ± 3°C. Tests are satisfactory if no tearing, breaking or cracking after folding is visible on the cuff and if the gloves pass the proof test voltage and the withstand test voltage.
FLAME RETARDANCY TEST : Application of a flame at a finger tips for 10 seconds. Test is satisfactory if, after 55 seconds, the flame has not reached the marker located 55 mm away at the other end.