Fire Hoses

CP COOL HOSE

A hose with a unique construction to ensure continuous oozing of water all around the jacket in a controlled manner whilst the build up pressure inside the hose is not lost. These hoses are used when the hoses are needed to pass through the flames and come in contact with fire. The stringent flame resistant test required under IS: 8423 ensures that the hoses when tested with a lighted blowlamp on a specimen of hose under water pressure do not fail.These hoses are excellent in fighting fires specially in coalmines, textile mills, refineries & high rise buildings. Properties Cotton Synthetic Fibre Circularly Woven Jacketed. Treated against rot with Mystox Abrasion Resistantv Ultra Thin Lining Outstanding Adhesion Light, Flexible, Compact, Flat Folding High Kink Resistance   Pressure Ratings Burst Pressure 36kg/cm2 (530 PSI) Proof Pressure 22kg/cm2 (320 PSI) Working Pressure 18 Kg/cm2 (260 PSI) Specifications IS 8423/1994 TAC approved Bearing ISI mark Flame Resistance

CRC RRL

CRC-RRL HOSES are the most popular, used by highly experienced fire fighters for decades due to the superb advantages. These type of hoses offer RRL Technology and ensures that the hoses are fabric reinforced rubberlined (RRL Technology) which gives an additional textile reinforcement in the hoses which is very similar to a double jacketed hose, i.e., hose within a hose. RRL Hose have a distinct lap joint, which readily identifies to the user the unmistakable sign of a RRL Hose. The jacket and the reinforcement of the hose which is predominantly cotton has excellent heat resistance property and, being a natural fibre, the hose jacket has a very good grip for the fire fighters during operation. RRL technology ensures that in extreme circumstances when the outer jacket is severely damaged, the inner reinforcement can continue delivering water at operational pressures; thereby averting an emergency situation. The RRL technology ensures that the outer jacket can even be repaired so that the hoses, which are severely damaged, can be used by virtue of their inner reinforced tube lining. Truly, this hose gives the advantages of two hoses in on Properties Cotton Synthetic Fibre Construction Circularly Woven Jacketed Rubberised Fabric Reinforced Rubberlined (RRL) Treated against rot with Mystox High Abrasion Resistant Outstanding Adhesion Flexible Compact Flat Folding Pressure Ratings Burst Pressure 36kg/cm2 (530 PSI) Proof Pressure 22kg/cm2 (320 PSI) Working Pressure 18 Kg/cm2 (260 PSI) Specifications IS 636/1988 Type A BS 6391 Type - 1 TAC approved Bearing ISI mark Abrasion Resistance 200 Cycle Heat Resistance 12 sec

CRC RRL EXTOCOAT

This popular hose is used by experienced fire fighters for its unsurpassed advantages. CRC Extocoat Hoses offer RRL Technology and ensures that the hoses are fabric reinforced rubberlined (RRL Technology), which gives and additional textile reinforcement in the hoses which is very similar to a double jacketed, i.e. hose within a hose. RRL Hose have a distinct lap joint, which readily identifies to the USER unmistakable sign of RRL Hose. The jacket is made from 100% synthetic yarn, which imparts extremely low weight and high burst pressure. This jacket is coated with a special elastomeric compound to give the added advantages of being unaffected Oils and grease, certain Chemicals as well as Mildew and Heat. RRL Technology ensures in extreme circumstances when the outer jacket is severely damaged, the inner reinforcement can continue delivering water at operational pressures, thereby averting an emergency situation. The RRL Technology ensures that the outer jacket can even be repaired so that the hoses, which are severely damaged, can be used by virtue of their tube lining. Properties 100% Synthetic Yarn Construction Circularly Woven Jacketed. Rubberised Fabric Reinforced Rubberlined (RRL) Elastomeric Outer Coating High Abrasion Resistant, Ozone, Heat, Sea Water Outstanding Adhesion Flexible Compact Flat Folding. Pressure Ratings Burst Pressure 38kg/cm2 (550 PSI) Proof Pressure 22kg/cm2 (320 PSI) Working Pressure 18kg/cm2 (260 PSI) Specifications IS 636/1988 Type A BS 6391 Type - 2 TAC approved Bearing ISI mark

CRC EXTOCOAT EXTRA

CRC-EXTOCOAT EXTRA is a very versatile hose lined with synthetic rubber compound of excellent ageing property. A jacket made from 100% High Tenacity Synthetic Yarn for excellent protection against mildew and rot and over and above coated with a specially compounded elastomer to give a high degree of protection against oil and grease, certain chemical agents and heat. This elastomeric coating provides excellent abrasion resistance so that the hose can withstand a high degree of wear and tear. Properties 100% Polyester Yarn Surface coating with Synthetic Polymer to withstand heat Circularly Woven Jacketed High Abrasion Resistant Resistant to Oil, Ageing, Ozone, Acids, Alkalies, Heat, Sea Water. Outstanding Adhesion Flexible Compact Flat Folding   Pressure Ratings Burst Pressure 40kg/cm2 (580 PSI) Proof Pressure 22kg/cm2 (320 PSI) Working Pressure 20kg/cm2 (288 PSI) Specifications IS 636/1988 Type A BS 6391 Type - 2 TAC approved Bearing ISI mark Abrasion Resistant 200 Cycle Heat Resistance 12 sec

CRC SUPER SYNTHETIC

CRC-SUPER SYNTHETIC Fire Hose is made out of High Tenacity Synthetic Yarn for a high working pressure and extremely high burst pressure to ensure fool proof performance in combating skyscraper and oil fires where extremely high pressure are required. The lining is a seamless type of synthetic rubber compound for excellent protection against ageing and tackiness. The synthetic jacket of the hose is completely inert against attacks from mildew and fungus. Moreover, being a 100% synthetic it can be dried very easily to form small and compact rolls, which can be stored and moved around easily. Properties 100% Polyester Rot Proof With stands high pressure Circularly Woven Jacketed Resistant to abrasion, Ageing, Ozone, Sea Water. High Kink resistant Outstanding Adhesion Flexible Compact Robust Flat Folding Easy cleaning   Pressure Ratings Burst Pressure 38kg/cm2 (550 PSI) Proof Pressure 22kg/cm2 (320 PSI) Working Pressure 18kg/cm2 (260 PSI) Specifications Generally conforming to IS 636/1988 Type A BS 6391 Type - 1 Abrasion Resistance

CRC TIGER BRAND

The Hose is made of cotton / synthetic circularly woven jacket with seamless rubber lined and unique adhesion of the fabric and rubber lining suitable for light duty operation. Properties Cotton Synthetic fibre Circularly Woven Jacketed Rot Proof Resistant to Abrasion, Mildew, Friction, Sea water & pressure . Flexible Robust Flat Folding   Pressure Ratings Burst Pressure 35kg/cm2 (500 PSI) Proof Pressure 14kg/cm2 (300 PSI) Working Pressure 14kg/cm2 (150 PSI) Specifications Generally conforming to IS 636/1988 Type A MMD & TAC Approved.

FLEXILINE HOSES

'FLEXILINE' HOSES are made from an all synthetic jacket, totally encapsulated in a Synthetic Rubber blend to form a high quality, unified lining and cover, resulting in a compact unity by pillar adhesion, The cover is a specially formulated elastomer, totally resistant against grease, oils, acids, ozone, alkalies, heat and fungus. The cover of FLEXILINE HOSE is lightweight, completely flexible and designed to facilitate a good grip. bearing ISI Mark under IS : 636 Type 'B'. The measurably thick cover contributes to impact damage, cut damage and resistance to heat, abrasion and chemicals. This spells the true, non-maintenance quality of FLEXILINE HOSES. Conventional hoses pick-up moisture and contamination and require regular maintenance of washing, drying and cleaning. With FLEXILINE, no drying is required, so Drying Towers can be dispensed with. The cover enables a simple 'wipe down and store' facility, due to which, the Hose is always available for use and lower stocks of hose Features Exceptionally resistant to scrubbing, the High Grade Synthetic Material with profiled surface texture, is easy to maintain and easy to handle. FLEXILINE Hoses are completely resistant to oil, unaffected by many chemicals, very pliable, heat resistant and rolls with a small coll diameter.   Pressure Ratings Burst Pressure 42kg/cm2 Proof Pressure 25kg/cm2 Specifications IS : 636/1988 Type B BS : 6391 Type B